DKM MACHINE


DKM MACHINE is our full-service in-house machine service.  We are able to design and engineer parts from scratch and build them all in our building for any industry.  Here is a complete list of DKM MACHINE equipment:

WELDING EQUIPMENT

Miller dynasty 200

  • Brand Miller
  • Aluminum, Mild Steel, Stainless Steel, Titanium
  • Process
  • Stick, TIG
  • Duty CyclE 60%
  • Duty Cycle 60% at 150A (TIG), 60% at 130A (Stick)

 

 Miler Millermatic 252 welder

 Weldable Metals

  • Stainless Steel
  • Steel
  • Aluminum

Wire Diameter

  • Solid Steel 0.023 in 0.045 in
  • Solid Steel 0.6 mm 1.2 mm
  • Stainless 0.023 in 0.045 in
  • Stainless 0.6 mm 1.2 mm
  • Flux Cored 0.03 in 0.045 in
  • Flux Cored 0.8 mm 1.2 mm

 

Lincoln Electric Power Mig 

  • Weldable Metals Steel, stainless steel, aluminum
  • Weld Thickness (in.) 0.030–0.75
  • Clamp Cable Length (ft.) 15

 

HTP mig 200

  • Maximum Output Amperage 200 
  • Minimum Output Amperage 20 
  • Maximum Recommended Thickness
  • *Single pass capacity varies depending on the material being welding and settings of machine 1/4" to 3/8" 
  • Duty Cycle 35% @ 200A
  • 100% @ 140A
  • Open Circuit Voltage 75 
  • Electronic Overload Protection Yes 
  • Cooling Air 
  • Wire Spool Capability
  • *4” spool with spool adapter, up to 44 lb. weight capacity *4”, 8”, and 12” 
  • Wire Diameter
  • Input Voltage 208—240V 
  • Input Amperage 35 
  • Frequency 50/60Hz 
  • Wire Feed Rate (In./Min.) 7 to 630 

Mittler bros louver punch:

  • Produces 1 to 5 inch wide louvers
  • Can be used with steel or aluminum
  • 16 gauge capacity

Mittler bros bead roller:

  • standard (1-1/8" Throat)

Max Capacity:

  • 19 Ga (.040") Mild Steel
  • 16 Ga (.050") Aluminum
  • 21 Ga (.035") Stainless

 

10’ Tennsmith sheet metal break:

  • Capacity, mild steel 18 gauge/1.25 mm
  • Bending length 121 in./3073 mm
  • Maximum lift of beam 1-7/8 in./47 mm
  • Front to rear beam adjustment 1/2 in./13 mm
  • Minimum reverse bend 1/4 in./6 mm
  • Minimum flange in capacity material 1 in./25 mm

 

10’ Tennsmith sheet metal shear:

Model: LM-1010

Type: Electro-Mechanical

SPECIFICATIONS:

  • Length of Cut......... 121”
  • Cut.............. 14 ga
  • Strokes Per Min....... 35 SPM

CAPACITIES:

  • Mild Steel ....... 16 ga
  • Stainless ........ 20 ga
  • Aluminum ....... 12 ga

 

6’ x 12’ Torchmate CNC plasma table:

GANTRY 

Working surface 60” x 144" 

Weight Capacity 2000 lb 

Cutting Speed 220 ipm 

PLASMA CUTTER 

Power Output 85 amps @ 60% duty 

Max. Production Cut 5/8" mild steel 

Max. Possible Cut 1-1/4" mild steel 

Material Most metals 

 

Cincinnati Milacron Arrow 1000 CNC Vertical Machining Center:

 

  • X Travel (Longitudinal)............................... 40"
  • Y Travel (Cross)...................................... 20"
  • Z Travel (Vertical)................................... 22"
  • Table Working Surface................................. 44"x20"
  • Table Work Load Capacity.............................. 1540 LBS
  • Spindle Horsepower.................................... 15 HP
  • Spindle Speeds........................................ 60-5000 RPM
  • Spindle Taper......................................... CAT 40
  • Feed Rates, X & Y..................................... 0.1 to 472 IPM
  • Feed Rate, Z.......................................... 0.1 to 472 IPM
  • Rapid Traverse X & Y.................................. 787 IPM
  • Rapid Traverse Z...................................... 787 IPM
  • Tool Storage Capacity................................. 21

 

Baileigh tubing bender RDB-250

  • Minimum CLR.5"
  • Minimum OD.25"
  • Mild Steel Solid Rod 1.25"
  • Mild Steel Pipe Schedule 40 2"
  • Mild Steel Round Tube Wall 2.5" (.125)
  • Mild Steel Square Tube (Wall) 2" (.125)
  • Stainless Steel Pipe Schedule 40 1.5"
  • Stainless Steel Round Tube Wall 2.375" (.125)
  • Chromoly Round Tube Wall 2" (.125)
  • Aluminum Round Tube Wall 2.5" (.156)
  • Maximum Center Line Radius Clr 9"

 

Supermax series II mill: 

  • Table Size: 9" x 49"
  • Longitudinal Table Travel: 34"
  • Saddle Cross Travel: 12"
  • Knee Vertical Travel: 16"
  • Quill Travel: 5"
  • Maximum Distance Spindle Nose to Table Top: 18-3/8"
  • Spindle Speeds, Variable: 60 - 4200 RPM
  • Power Quill Feed Rates (3): .005, .0031, & .0015 In/Rev.
  • Spindle Nose Taper: R8

 

Bridgeport w/Proto Trak plus

  • Rpm: 1385
  • HP:2
  • Volts:480
  • X-axis: 36''
  • Y-axis: 12''
  • Z-axis:16''
  • Control: ProtoTrak Plus
  • Table size: 42'' x 9''

 

DoAll bandsaw:

  • Model No. C5A
  • Serial No. 314-74255 New 1974
  • Cutting Capacity, Rounds: 9-3/4"
  • Cutting Capacity, Rectangles: 9" x 12"
  • Blade Length: 132"
  • Blade Width: 3/4"
  • Blade Thickness: .035"
  • Blade Speed, Variable: 105 - 275 FPM
  • Indexing Stroke: 1/8" - 14"

Denison Hydraulic Press 4Ton Multipress

  • Model # MC101 A11 A12
  • Serial number 1798 Special
  • 3 Hp-220/440 Volt-3 Phase motor
  • Mounted to work table
  • 6" Ram
  • Throat: 12x13

Ez Path II (by Bridgeport) lathe

 

  • Bridgeport EZ-Path CNC Control
  • Swing Over Ways 19.69"
  • Swing Over Cross Slide 9.92"
  • Max Center Distance 39.37"
  • Center Height 9.84"
  • Hole Through Spindle 2-9/16"
  • Spindle Nose A2-6"
  • Spindle Speeds Variable (3) Ranges 4-3,500 RPM
  • Rapid Traverse Rates (X/Z) 295.3 / 472.4 IPM
  • Tailstock Quill Travel 4.72"
  • Tailstock Quill Taper #4MT
  • Spindle Drive 10 HP

 

Chicago 10’ press brake (8L10)

 

  • Max Press Capacity (Tons)
  • 60 Ton Mid / 90 Tom Bottom Stroke
  • Overall Bed and Ram Length 120"
  • Distance Between Housings 8'6"
  • Throat Depth 8"
  • Stroke Length 3"
  • Ram Adjustment 4" Motorized
  • Minimum Closed Height 12" SDAU
  • Clutch Type Mechanical Friction
  • Ram Speed(s) Variable to 40 Strokes Per Minute Max (Approx)
  • Backgauge Type 24" Front Operated, Hand Power
  • Backgauge Capacity 24"
  • Drive Motor 5 HP